Muzzleloader Builders' Supply
 

Shopping Categories:

    BallMolds
   Barrels
   Books-Videos-Drawings
   Breechplugs
   ButtCaps
   Buttplates-InvestmentCast
   Buttplates-Sandcast
   Cleaning&Equipment
   ColerainBarrels
   EuropeanPistolKits
   Flints&Ignition
   Gallery
   Gun-Finishes
   Inlays-DieCut
   Inlays-InvestmentCast
   Inlays-Plates&Combs
   Inlays-SawCut
   Inlays-VentPicks
   Leather&Cloth-Goods
   Locks-Chambers
   Locks-Davis-Flint
   Locks-Davis-Parts
   Locks-Davis-Percussion
   Locks-L&R-Flint
   Locks-L&R-Parts
   Locks-L&R-Percussion
   Locks-Siler-Flint
   Locks-Siler-Parts
   Locks-Siler-Percussion
   Measures&Cappers
   NEW!
   Nosecaps
   Patchboxes
   Pistols
   Raylbarrels
   RiceBarrels
   RifleKits
   Riflestocks
   Rods-Tips-Jags&Starters
   Screws
   Screws-Bolts&Swivels
   Sheet-Metal&Rod-Stock
   Sideplates-DieCut
   Sideplates-InvestmentCast
   Sideplates-Sandcast
   Sideplates-SawCut
   Sights
   Thimbles
   Toeplates
   Tools
   Trigger-Parts
   Triggerguards-InvestmentCast
   Triggerguards-Sandcast
   Triggers
   Underlugs-Keys&Ribs
   barrels
   breechplugs
   flints
   gun-finishes
   inlays-diecut
   lugs-Keys&Ribs
   rods-tips-jags
   screws
   sideplates
   sights
   tools
  Home
  mbshome
  About Us
  Contact Us
  Return Policy

Found 98 items, showing 1 to 25.    Next 25 Matches
12590 - .008 x 36” Brass Flat Wire Inlay
Our flat wire ribbon inlay has been updated to a more correct width according to standards of application by some of today’s master craftsmen. According to original rifle restorations, wire inlay was never installed very deep into the surface of the wood. The challenge today is to install it in such a manner as to prevent its backing out when the wood shrinks in the normal aging process. It is really not hard to do, but takes practice and good technique. The Art of Building the Pennsylvania Longrifle has a good section on installation. Our flat wire comes in 36” lengths in brass and German Silver .005, .008 and .014 thick. Sterling silver comes in .010 thickness, only in 36” length as well. Annealing or heating is not necessary. Be careful. The edges are extremely sharp!
$ 2.65

Check Out
12595 - .005 x 36” G.S. Flat Wire
Our flat wire ribbon inlay has been updated to a more correct width according to standards of application by some of today’s master craftsmen. According to original rifle restorations, wire inlay was never installed very deep into the surface of the wood. The challenge today is to install it in such a manner as to prevent its backing out when the wood shrinks in the normal aging process. It is really not hard to do, but takes practice and good technique. The Art of Building the Pennsylvania Longrifle has a good section on installation. Our flat wire comes in 36” lengths in brass, .008 and .014 thick, and German Silver in .005, .008 and .014 thick. Sterling silver comes in .010 thickness, only in 36” length as well. Annealing or heating is not necessary. Be careful. The edges are extremely sharp!
$ 2.95

Check Out
12600 - .008 x 36” German Silver Flat Wire Inlay
Our flat wire ribbon inlay has been updated to a more correct width according to standards of application by some of today’s master craftsmen. According to original rifle restorations, wire inlay was never installed very deep into the surface of the wood. The challenge today is to install it in such a manner as to prevent its backing out when the wood shrinks in the normal aging process. It is really not hard to do, but takes practice and good technique. The Art of Building the Pennsylvania Longrifle has a good section on installation. Our flat wire comes in 36” lengths in brass and German Silver .005, .008 and .014 thick. Sterling silver comes in .010 thickness, only in 36” length as well. Annealing or heating is not necessary. Be careful. The edges are extremely sharp!
$ 2.95

Check Out
12610 - .014 x 36” Brass Flat Wire Inlay
Our flat wire ribbon inlay has been updated to a more correct width according to standards of application by some of today’s master craftsmen. According to original rifle restorations, wire inlay was never installed very deep into the surface of the wood. The challenge today is to install it in such a manner as to prevent its backing out when the wood shrinks in the normal aging process. It is really not hard to do, but takes practice and good technique. The Art of Building the Pennsylvania Longrifle has a good section on installation. Our flat wire comes in 36” lengths in brass and German Silver .005, .008 and .014 thick. Sterling silver comes in .010 thickness, only in 36” length as well. Annealing or heating is not necessary. Be careful. The edges are extremely sharp!
$ 2.70

Check Out
12620 - .014 x 36” German Silver Flat Wire Inlay
Our flat wire ribbon inlay has been updated to a more correct width according to standards of application by some of today’s master craftsmen. According to original rifle restorations, wire inlay was never installed very deep into the surface of the wood. The challenge today is to install it in such a manner as to prevent its backing out when the wood shrinks in the normal aging process. It is really not hard to do, but takes practice and good technique. The Art of Building the Pennsylvania Longrifle has a good section on installation. Our flat wire comes in 36” lengths in brass and German Silver .005, .008 and .014 thick. Sterling silver comes in .010 thickness, only in 36” length as well. Annealing or heating is not necessary. Be careful. The edges are extremely sharp!
$ 3.05

Check Out
16970 - Inletting Black, Jarrow's
This stuff seems to last forever! If you forget and leave the lid off, don’t worry, its better-that’s why it lasts. Just barely put any on whatever part is to be inlet and the color transfers easily to the high places in the wood. It’s no rocket science! And this takes all the guess work out of the project. Use a Q-tip or fine swab to apply and do so sparingly. 1/2 ounce bottle goes a long way!
$ 6.00

Check Out
18800 - 1/16
We offer the drill bit sizes commonly used in building muzzleloaders. These are surface treated jobber length bits that should give good service. They all have a shank that is the same size as the bit. A tap & drill chart is on the next page.
$ 1.50

Check Out
18810 - 5/64
Drill Bit
$ 1.50

Check Out
18820 - 3/32
Drill Bit
$ 1.50

Check Out
18830 - 7/64
Drill Bit
$ 1.50

Check Out
18840 - 1/8
Drill Bit
$ 1.50

Check Out
18850 - 9/64
Drill Bit
$ 1.75

Check Out
18860 - 11/64
Drill Bit
$ 1.75

Check Out
18870 - 13/64
Drill Bit
$ 1.75

Check Out
18880 - 15/64
Drill Bit
$ 1.75

Check Out
18890 - 5/16
Drill Bit
$ 2.65

Check Out
18900 - 33/64
Drill Bit
$ 11.50

Check Out
18910 - 37/64
Drill Bit
$ 12.25

Check Out
18915 - 28
Drill Bit
$ 2.00

Check Out
18920 - 11/16
Drill Bit
$ 12.75

Check Out
18925 - 31
Drill Bit
$ 2.00

Check Out
18930 - 33
Drill Bit
$ 2.00

Check Out
18935 - 29
Drill Bit
$ 2.00

Check Out
18940 - 21
Drill Bit
$ 2.00

Check Out
18945 - 19
Drill Bit
$ 2.00

Check Out
Found 98 items, showing 1 to 25.    Next 25 Matches
Home   |  mbshome   |  About Us   |  Contact Us   |  Return Policy

Thanks for Visiting us!